Sealing Sandstone Pavers With Water-Based Products

When it comes to preserving the beauty of sandstone surfaces in one’s home, the best option any homeowner can resort to is to use a sandstone sealer. At first the term might not ring a bell yet, which is why this article would be a big help. The following information contains an introduction to this product, its main functions, and how one can apply these on his home’s surfaces made from sandstones.

When it comes to providing protection for the home’s natural sandstone surfaces, it is best to use a water-based or impregnated sandstone sealer. This type of sealer prevents water and other harmful elements from penetrating the stone passing through the stone’s capillary skin pores. Since the material is categorized to be extremely porous, it tends to absorb fluids at a rapid rate thus making way for early disintegration to take place. This is why using sealers is important. Any homeowner would not want this to happen.

Sealing sandstone pavers with a water based product helps in minimizing the maintenance of natural stone surfaces as it helps prevent stains from barbecues, food and drink spills, pet messes, dirt, and fallen leaves to happen. Basically, the idea here is that if sandstone surfaces are sealed, the less likely will different kind of stains leave a mark on the pores of the stone and will instead leave a mark on the sealer.

Another function of this type of sealer is that it prevents or slows the growth of moss or mildew, especially in areas that frequently get damp. It lessens the rate of color fading and prevents infestations by insects and weeds. Sandstone surfaces that are applied with a sealer usually look newer than those that have not been applied with it.

Application of this type of sealer usually takes an average amount of effort and time depending on how large or small the area is. Also, the amount to be consumed depends on how porous the sandstone is. The average application, however, ranges from about six to eight meters for every liter. It can be applied using either a sprayer, brush, or a roller. One, however, must take care to use protective gloves along with a vapor mask and goggles to make sure his health is not put at risk. Sprayers are usually preferred whenever the area to be coated contains some molds and casts.

When sealing sandstone pavers, the area should be left untouched for as long as 24 hours max to make sure that the finish would come out as naturally as possible.